Polygon mirror motor error 3: This SC is issued after the 10th attempt fails to detect the signal. Fusing temperature control software error. Toner collection motor error The toner collection motor sensor output does not change for 3 seconds while the toner collection motor is on. Potential sensor calibration error 5 During drum potential sensor calibration, when —V is applied to the drum, the output value is out of the prescribed range. SC card access An error occurred while an SD card was used.

Uploader: Kinris
Date Added: 24 December 2015
File Size: 69.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 19026
Price: Free* [*Free Regsitration Required]

Timeout at ON The polygon mirror motor ricoh 5500 did not enter “Ready” status within 20 sec. Potential sensor rixoh error 4 During drum potential sensor calibration when adjusting the drum potential VH for LD power adjustment, the first time the VH pattern is made, the drum potential sensor detects that VH is more than V: The printer is capable of printing on both sides of a page. Ricoh 5500 us a note at webmaster precisionroller.

In Stock – Ships Today! Manufacturer’s suggested retail price. Charge corona wire cleaner error 1 The charge cleaner pad ricoh 5500 not arrive at the home position: Zero cross signal error High frequency noise was detected on the power line.

Engine startup error The machine engine, controlled ricoh 5500 the BICU Base Image Control Unitwas operating incorrectly when the machine was switched on or returned to normal operation from the energy save mode. Fusing lamp error After the start of ricoh 5500 warmup cycle, a fusing lamp was at full power for 1. The sizes of paper that the printer can print on.

Then make sure ricoh 5500 the fusing unit is clean and has no obstacles in the paper feed path. Precision Roller is in no way affiliated, sponsored or endorsed by these copyright owners or their affiliates or dealers This website ricoh 5500 a secure server to encrypt all sensitive information.

Data transfer did not execute normally while data was being written to the HDD.

BẢNG MÃ LỖI RICOH MP ,,,,,

Potential sensor calibration error 6 During drum potential sensor calibration, when —V is applied to the drum, the output value is out of the prescribed range. This SC is issued after ricoh 5500 10th attempt fails to detect the signal.

Transfer output abnormal When the transfer is output, the feedback voltage remains higher than 4V ricoh 5500 60 ms.

Main fan error The main fan motor lock signal goes high for 5 s while the ricoh 5500 is on. If the program does not contain this license data, or if the result of the check shows that the license data ricoh 5500 rucoh program on the SD card is incorrect, then the ricoh 5500 program cannot execute and this SC code is displayed. Toner recycling unit error Encoder pulse does not change for 3 s after the main motor switches on.

XSCRDY signal error The polygon mirror motor “Ready” signal went inactive HIGH while the motor was operating at normal speed, even though the motor was neither switched off nor was there a request for a change in speed. If web end is detected for another ms, then the SC is logged. Ricoh SR Paper Supply: SD card error 3: Confirmation The machine detects an electronic license error in the application on the SD card in the controller ricoh 5500 immediately ricoh 5500 the machine ricoh 5500 turned on.

Aficio MP 5500/6500/7500

SD card removed The SD card in the boot slot 550 the machine was turned on was removed while ricoh 5500 machine was ricoh 5500. After replacing the web with a new one, reset SP to “0” to release SC Fusing exit motor error The PLL lock signal was low for 2 seconds during motor operation. The unit polls for the signal every 50 ms. ID sensor error 5 Vsg falls out of the adjustment target 4.

Duplex jogger motor error 1 When the jogger fence moves to the home position, the jogger Ricoh 5500 sensor does not turn on even if the jogger ricoh 5500 55000 has moved the jogger fence Aficio MP Parts. Month and year of ricoh 5500 original release. Polygon mirror motor error 2: Potential sensor calibration error 5 During drum potential sensor calibration, when —V is applied to the drum, the output value is out of the prescribed range.

Fusing temperature warm-up error One of the following occurred: